Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Uživatelský manuál stáhnout pdf (Strana 70)

Interactive Set-Up

56 AX3000 - User's Manual

3.5.3 - Connecting a Serial Terminal

Two serial terminals can be attached to the AX3000’s serial ports. These serial

terminals communicate with the target server(s) using the AX3000’s embedded

telnet service.

To configure the telnet service for the chosen serial auxiliary port, select the

[Configuration]-[Ports]-[Auxiliary Ports]-[AuxX] dialog and enter the

following parameters:

- Service: select telnet.

- Parameters: press <Space> to access the following box:

- Server: name of the server selected from a menu (see Chapter 3.1.3).

- TCP Port: numeric identifier of the telnet service on the target server.

(Default value is 23).

- TERM: the value of this variable is 'negotiated', between the server

and the AX3000.

- Auto-Connection: if this parameter is set to 'yes', the connection will

be automatically established when the AX3000 is powered-up.

Alternatively the user can press any key on the serial terminal

keyboard to initiate the connection.

- Auto-Reconnection: if this parameter is set to 'yes' a new connection

is automatically established after a disconnection. If set to ‘no’ the

user can press any keyboard key to establish a new connection.

- Enhanced parameters: see Appendix A.10.3.

Note: the serial auxiliary port used must be configured for 'bi-directional'

operating mode.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 297 298

Žádné komentáře

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Uživatelský manuál Strana 70